Español

The QRS and Precordial Progression on the ECG: How to Analyze Them | Step 5

By Francisco Rodríguez Caamaño · Nurse · Cardiology and Coronary Care

Electrocardiograma docente: QRS y progresión precordial en el ECG: cómo analizarlos | Paso 5

The QRS measures 90 ms.

Fine. But that doesn’t explain everything. Knowing how long it lasts is good, but the important question is a different one: are the ventricles depolarizing the way we’d expect?

That’s the goal of step 5 of the Cardiología sin Miedo 8-step method.

After checking the technique, the rhythm, the axis and the P wave and PR, now it’s time to look squarely at ventricular activation. Two things shouldn’t slip past you here: the QRS duration, whether it’s narrow or wide, and R-wave progression in the chest leads V1–V6.

If you still need to review what the complex represents or how its deflections are named, see the parts of the ECG. And if you need to understand why V1 and V6 show such different views, review how the ECG leads work.

The QRS is the electrical footprint of ventricular depolarization

The QRS complex represents depolarization of the ventricles.

Because ventricular mass is much larger than atrial mass, the QRS usually looks bigger and more striking than the P wave. In a heart with normal conduction, ventricular activation happens quickly and in a coordinated way. That’s why one of the first questions in this step is very simple:

Is the QRS narrow or wide?

QRS duration: when it’s narrow or wide

As a practical rule, we call a QRS wide when it lasts 120 ms or more. A normal QRS is usually under about 110 ms, although the exact limits can vary slightly depending on the reference and the context.

At 25 mm/s, 120 ms is three small boxes. If you need to measure it, remember something basic: the QRS is measured from the start of the first deflection to the end of the last.

You don’t need to measure every complex you see. A first visual assessment is often enough. If it looks clearly narrow, move on. If it looks widened or leaves you in doubt, that’s when it’s worth measuring.

Why does narrow or wide matter?

Because QRS width gives you a quick clue about how the impulse is reaching and spreading through the ventricles.

A narrow QRS suggests ventricular activation is spreading quickly through the conduction system. A wide QRS (≥120 ms) shows that ventricular depolarization is taking longer than expected and calls for a look at its morphology and the context of the rhythm.

And here it pays to be careful: a wide QRS isn’t a diagnosis yet. It’s a finding. It then has to be integrated with the morphology of the tracing, the rhythm and the rest of the ECG.

Don’t look at just one lead

One of the most common mistakes is focusing on a single lead and drawing conclusions too early.

But the ECG doesn’t show twelve different hearts. It shows the same electrical activity from twelve different viewpoints. That’s especially clear when we go through leads V1 to V6.

R-wave progression in V1–V6

The chest leads view ventricular depolarization in the horizontal plane.

So we don’t expect the QRS to look the same in V1 as in V6. Normally its shape changes as we move across the chest. We call that gradual change precordial progression.

Put simply: as we go from V1 toward V6, the R wave usually becomes more prominent and the S wave usually becomes less so.

What’s usual in V1

On a normal ECG, V1 usually shows a mostly negative QRS. Often we’ll see a small R followed by a deeper S.

You don’t need to memorize every possible drawing. Keep the practical idea: in V1 the negative part usually dominates.

The QRS transition zone: V3–V4

Moving through V2, V3 and V4, the R wave normally grows and the S wave shrinks.

At some point the R and S amplitudes are similar, meaning the R/S ratio approaches 1. That area is called the transition zone and it’s usually around V3–V4, although there’s normal variation.

Not every ECG has to change at exactly the same point. What matters is seeing a reasonable progression.

What’s usual in V5 and V6

By V5 and V6, the QRS is normally mostly positive, with a more prominent R wave and a small or shallow S.

If you want a mental summary of precordial progression, this idea may help:

V1 more negative → transition around V3–V4 → V5–V6 more positive.

That general pattern is far more useful than trying to learn six leads as six separate drawings.

Poor R-wave progression: what it means

Sometimes you go through the chest leads and that progression doesn’t appear as expected. The R wave doesn’t grow, the transition comes too early or too late, or the whole thing just doesn’t fit.

In that case you can describe the finding as poor R-wave progression.

That term is descriptive, not diagnostic. It can have different causes, including something as simple as misplaced chest electrodes. Before giving it clinical meaning, review correct V1–V6 placement and the technical quality of the recording.

Not every wide QRS is a bundle branch block

This point deserves to be clear.

If a QRS measures 120 ms or more, you can say it’s widened. That’s correct.

But you shouldn’t automatically call it a bundle branch block for that reason alone. To reach that diagnosis you have to study the specific morphology of the complex and check whether it meets the criteria.

Describe first → then recognize patterns → finally integrate.

A simple routine for step 5

When you reach the QRS, you can follow this sequence:

duration → width → morphology → V1 → transition → V5–V6.

First decide whether the QRS looks narrow or wide; then look at its overall shape and go through the chest leads to check for reasonable R-wave progression. If something catches your eye, that’s when you measure and dig deeper.

Quick checklist for step 5

CheckWhat to ask yourself
DurationIs it under 120 ms, or is it widened (≥120 ms)?
WidthDoes it look narrow or wide?
MorphologyDo the complexes look consistent?
V1Does the negative part dominate?
TransitionDo R and S roughly balance out in V3–V4?
V5–V6Does the positive part dominate?
ProgressionDoes the R wave grow reasonably from V1 to V6?

Don’t read six loose leads: follow a story

This is probably the most useful idea in the whole step.

You don’t need to memorize six different QRS shapes. What matters is recognizing a progression: you start in V1 with a usually more negative complex, move toward a transition zone and end in V5–V6 with more positive complexes.

Once you see that whole story, spotting what’s abnormal becomes much easier.

If you want to review the previous step, you can go back to how to analyze the P wave and PR interval. You can also return to the complete 8-step method for reading an ECG.

Frequently asked questions about the QRS and R-wave progression

What’s the normal QRS duration?

In adults, a QRS usually measures roughly under 110 ms. Between 110 and 119 ms it may be considered mildly prolonged depending on the context and the reference; we call it a wide QRS when it reaches 120 ms or more.

When is a QRS considered wide?

When it lasts 120 ms or more. At 25 mm/s that’s three small boxes or more.

What does a wide QRS mean?

It means ventricular depolarization is taking longer than expected. It’s a finding that calls for a look at the QRS morphology and the context; on its own it doesn’t establish a specific diagnosis.

What is R-wave progression?

It’s the gradual increase in the positive part of the QRS as you move from V1 toward V5–V6, while the S wave usually gets smaller. It reflects how the view of ventricular depolarization changes in the horizontal plane.

Where is the transition zone normally?

It’s usually around V3–V4, where the R and S amplitudes are similar. There’s normal variation, and not every ECG transitions at exactly the same point.

What does poor R-wave progression mean?

It describes precordial progression that doesn’t follow the expected pattern. It doesn’t identify a cause on its own and should prompt you to check, among other things, the placement of the chest electrodes.

The next step

We’ve followed atrial activation, the impulse’s passage to the ventricles and ventricular depolarization.

Now it’s time to see what happens next.

In step 6 we’ll get into the ST segment and the T wave, two parts of the ECG that tend to grab attention but are also best read with order and context.

8-step method · Step 5 of 8

About this content

Written by Cardiología sin Miedo. This article is part of the Cardiología sin Miedo 8-step method, the project’s own teaching structure for organizing how you read an ECG.

Last editorial review: November 21, 2026 · About the project

References

  • El idioma del ECG. Cardiología sin Miedo. Chapter 5: Waves, segments and intervals (in Spanish).

Educational note. This content is for educational purposes and is aimed mainly at students and healthcare professionals. ECG interpretation must be integrated with the patient’s clinical situation and doesn’t replace professional assessment, care protocols or current clinical guidelines.

Practice and measure: review the QRS, bundle branch blocks and precordial progression with the online ECG generator. To check QRS duration, R/S ratios and the transition zone, use the online ECG calculator.

If you read Spanish, the complete guide to reading any ECG with the eight-step method is in “El idioma del ECG”.

Rate this article No ratings yet
Views: 0

About the author

Francisco Rodríguez Caamaño is a nurse (Diploma in Nursing, University of Salamanca, 1998) who currently works in cardiology and the coronary care unit. He created Cardiología sin Miedo, an educational project that explains cardiology and electrocardiography with clarity, reasoning and rigor.

You can keep going with the map of ECG articles by topic or practice right away with the ECG generator.

Leave a Reply