There’s a P wave in front of every QRS.
Great. We already saw something like this when we were trying to work out where the rhythm came from. But now we’re going to look at it differently.
Do all the P waves look alike? Is their shape reasonable? How much time passes from the start of atrial activity to the start of the QRS? Does that time stay the same on every beat?
In step 4 of the Cardiología sin Miedo 8-step method, we stop just checking that there’s atrial activity and start studying the P wave and the PR interval in a bit more detail.
The underlying question is simple: how do the atria activate, and how does the impulse then reach the ventricles?
In this guide we’ll look at what the P wave represents, how long it usually lasts, how to measure the PR interval correctly and what its usual range is. If you still need to review the difference between a wave, a segment and an interval, you can go back to the parts of the ECG.
The P wave: the atria’s electrical footprint
The P wave represents atrial depolarization.
The impulse, which normally starts in the sinus node, spreads through the right atrium and also reaches the left, so the activation of both ends up projected on the ECG as the P wave.
We’re not trying to measure every small variation in the P wave. We want to check that it keeps a consistent appearance and spot any waves that clearly stand out for being too wide, too tall or different from one another.
As with the rest of the method, we observe first and measure when needed.
Where is it worth looking at the P wave?
Not every lead shows atrial activity equally well. For a first assessment, II is usually especially useful, because normal atrial depolarization heads roughly toward that lead and the P wave usually looks positive and fairly clear.
aVR gives the opposite view, and in usual sinus rhythm we expect a negative P wave there. We already used this in step 2 to get a sense of where the rhythm starts. If you want to review those criteria, see how to recognize sinus rhythm on the ECG.
Now we take one small step further: we’re not just confirming that “there are P waves”, we’re asking whether they look consistent from one beat to the next.
How long should a P wave last?
Under usual conditions, the P wave lasts less than 120 ms.
At a recording speed of 25 mm/s, that’s fewer than three small boxes.
That doesn’t mean we should measure every P wave we find. If it looks normal and there’s no reason to suspect an atrial abnormality, we can move on. But if it looks especially wide, striking or fragmented, measuring it can help turn a visual impression into data.
If a measurement could change what you think of the ECG, measure it.
The PR interval on the ECG: how to measure it
Once we’ve looked at atrial activity, we want to know how much time passes before ventricular activation starts. That time shows up in the PR interval.
And here it pays to be very precise about something simple:
The PR is measured from the start of the P wave to the start of the QRS complex.
Not from the end of the P wave or from its peak. From the start of the P wave to the start of the QRS.
Don’t confuse it with the PR segment: the segment starts when the P wave ends and stops when the QRS begins, while the PR interval also includes the P wave itself.
What does the PR really represent?
Several things have happened during that interval: the impulse has spread through the atria, reached the AV node and then carried on through the conduction system until ventricular depolarization begins.
That’s why the PR doesn’t represent only the AV node, even though much of the physiological delay happens there. What we measure is the time from the start of atrial depolarization to the start of ventricular depolarization.
Once we understand this, the interval stops being just a number that has to fall between two other numbers.
Normal PR interval: 120–200 ms
As a practical reference, a usual PR interval is roughly 120 to 200 ms.
At 25 mm/s that’s 3–5 small boxes.
We don’t need to measure it compulsively on every beat. We can start by seeing whether it looks clearly short or long and whether it stays the same from beat to beat; if there’s any doubt, then we measure.
Staying constant matters as much as its duration
Picture two ECGs. On the first, all the PR intervals measure about the same. On the second, the PR changes gradually from beat to beat.
Even if both had individual values in a similar range, they aren’t telling the same story.
That’s why in this step we don’t only ask how long the PR is. We also want to know whether it stays constant. The timing relationship between the P wave and the QRS carries as much information as the isolated value.
Does every P wave make it to the ventricles?
In step 2 we looked at the P–QRS relationship in general terms. Now we can look more closely: is every P wave followed by a QRS? Are there P waves that don’t conduct? Are there QRS complexes with no P wave before them? Does the relationship hold throughout the recording?
We don’t need to diagnose every atrioventricular block yet or explain every possible mechanism. That will have its place when we study conduction disorders.
Here we’re after something more basic: recognizing when communication between atria and ventricles looks orderly and when it deserves a second look.
A long or short PR is a finding, not a diagnosis
If we find a PR over 200 ms, we can describe it as prolonged. If it’s under 120 ms, we can describe it as short.
But neither finding should automatically lead to a conclusion on its own. A short PR means something different depending on what the QRS looks like and what else is on the tracing, and a prolonged PR has to be analyzed together with the relationship between the P waves and the ventricular complexes.
A finding gains meaning when we relate it to the others.
That’s why this page sticks to measurement and description. The specific mechanisms and patterns of AV block are covered in the articles on conduction disorders, so a basic measurement doesn’t get mixed up with diagnoses that need more context.
A simple routine for step 4
When you reach the P wave and PR, you can follow this sequence:
P wave → morphology → PR → constancy → P–QRS relationship.
First look at the P waves and check that they look alike. Then look at how they relate to the QRS complexes, judge the PR by eye, and measure when something looks out of range or could change your interpretation.
Quick checklist for step 4
| Check | What to ask yourself |
|---|---|
| P wave | Is it present and does it repeat with a similar shape? |
| Orientation | Does its appearance fit the origin we’ve proposed? |
| Duration | If it needs measuring, is it under 120 ms? |
| PR | Is it roughly between 120 and 200 ms? |
| Constancy | Does the PR stay stable? |
| P–QRS | Does every P wave keep a consistent relationship with the QRS? |
Don’t look at the P wave and the PR as two separate things
The P wave tells us about atrial activation. The PR lets us follow the story from the start of that activation until the ventricles begin to depolarize.
That’s why it makes more sense to look at them together: first we see what happens in the atria, then how the impulse continues toward the ventricles.
If you want to review the previous step, you can go back to how to calculate the ECG axis. And if you want to see the whole journey, there’s the 8-step method for reading an ECG.
Frequently asked questions about the P wave and PR interval
What is the normal PR interval on an ECG?
As a practical reference, the PR interval is usually between 120 and 200 ms. At 25 mm/s that’s roughly 3–5 small boxes.
Where do you measure the PR interval from?
From the start of the P wave to the start of the QRS complex.
What does the PR interval represent?
It represents the time from the start of atrial depolarization to the start of ventricular depolarization. It includes conduction through the atria, the AV junction and the proximal parts of the conduction system.
How long does the P wave normally last?
Under usual conditions it lasts less than 120 ms, which is fewer than three small boxes at 25 mm/s.
Does a short or long PR give a diagnosis on its own?
No. A PR under 120 ms or over 200 ms is a finding that has to be interpreted together with the QRS morphology, how constant the PR is, the P–QRS relationship and the rest of the ECG.
Related articles
The next step
We’ve checked the technique, studied the rhythm, placed the axis and followed the impulse from the atria to the start of ventricular activation.
Now it’s time to look closely at what happens when the ventricles depolarize.
In step 5 we’ll analyze the QRS complex and precordial progression: how long the QRS lasts, what it means for it to be narrow or wide, and how its shape should change as we go through V1, V2, V3… up to V6.
If you want to go further than these articles, the YouTube channel (in Spanish) and El idioma del ECG (a book in Spanish) will develop the method in more depth and with more visual support.
8-step method · Step 4 of 8
About this content
Written by Cardiología sin Miedo. This article is part of the Cardiología sin Miedo 8-step method, the project’s own teaching structure for organizing how you read an ECG.
Last editorial review: November 21, 2026 · About the project
References
- El idioma del ECG. Cardiología sin Miedo. Chapter 5: Waves, segments and intervals (in Spanish).
Educational note. This content is for educational purposes and is aimed mainly at students and healthcare professionals. ECG interpretation must be integrated with the patient’s clinical situation and doesn’t replace professional assessment, care protocols or current clinical guidelines.
Practice and measure: practice reading the P wave, PR and AV blocks with the online ECG generator. The online ECG calculator converts boxes to milliseconds and checks atrial criteria from your measurements.


Leave a Reply