Español

Basic ECG Course. Lesson 6. Waves, Segments and Intervals

An ECG can look like a collection of letters: P, PR, QRS, ST, T, QT… But those pieces aren’t independent. They make up a single electrical story that reads from left to right.

In this lesson we won’t measure anything yet. First we’ll learn to recognize the boundaries and understand what each part represents. Counting boxes is easy; the hard part is knowing which two points to count between.

By the end of this lesson you should be able to

  • Tell a wave, a segment and an interval apart.
  • Recognize the isoelectric line as a reference.
  • Find the P wave, the PR segment and the PR interval.
  • Recognize the QRS complex and understand what Q, R and S mean.
  • Find the J point and the ST segment.
  • Identify the T wave and the QT interval.
  • Recognize a possible U wave without mistaking it for the end of the T wave.
  • Walk through a normal beat from left to right without relying on labels.

1. Three words before we start

Wave, segment and interval don’t mean the same thing.

  • A wave is a recognizable deflection that moves away from the reference line.
  • A segment is a stretch between recognizable electrical components.
  • An interval is a period of time that includes at least one wave and, usually, a segment as well.

Wave = shape. Segment = stretch between shapes. Interval = span of time that includes shapes.

The difference stops being a matter of vocabulary as soon as we measure. The PR segment and the PR interval start at different points.

Parts of an ECG cycle in lead II: P wave, PR interval, QRS complex, J point, ST segment, T wave, QT interval and U wave
Map of one electrical cycle: P, PR, QRS, J point, ST, T, QT and a possible U wave. Figure from El idioma del ECG (labels in Spanish). Tap to enlarge.

2. The isoelectric line doesn’t mean nothing is happening

When the tracing is almost flat, it doesn’t mean the heart has stopped electrically. It means that, in that lead, there’s no net electrical difference large enough to produce a visible deflection.

To find our bearings we need a reference line. When it’s clearly visible, the TP segment, between the end of the T wave and the start of the next P wave, is especially useful.

In tachycardias or difficult tracings it may not be available. Later we’ll see how to choose a practical reference. For now, keep this idea: isoelectric doesn’t mean inactive.

3. The P wave: the visible story begins

The normal impulse starts in the sinus node, but the node’s own activity isn’t seen directly on the surface ECG. The first visible signal usually appears when the atria depolarize.

P wave = atrial depolarization.

It doesn’t represent atrial contraction. Electrical activation comes first and then triggers the mechanical response.

4. PR segment and PR interval: similar, but not the same

When the P wave ends, and before the QRS begins, there’s a stretch close to the baseline. That’s the PR segment.

  • PR segment: end of P → start of QRS.
  • PR interval: start of P → start of QRS.

The interval includes the P wave itself; the segment doesn’t. During that time the impulse keeps traveling from the atria toward the conduction system and crosses the atrioventricular junction.

Later, when we measure the PR, we’ll start at the beginning of the P wave, not at its end.

5. The QRS complex: ventricular depolarization

After the PR comes the most eye-catching structure on most ECGs: the QRS complex. It represents ventricular depolarization.

Q, R and S aren’t three anatomical areas of the ventricle. They’re names that describe the deflections of the complex:

  • Q: the first negative deflection before an R wave.
  • R: the first positive deflection of the complex.
  • S: a negative deflection that comes after an R wave.

Not every QRS contains Q, R and S. The shape changes from lead to lead because each one views the same activation from a different point of view.

6. Where is atrial repolarization?

The atria repolarize too. But that signal is small and usually coincides in time with the large ventricular depolarization, so it normally stays hidden inside the QRS.

It does happen; it just doesn’t usually produce a clearly visible wave of its own.

7. The J point: the border between QRS and ST

The QRS ends and the ST segment begins. The exact point where they meet is called the J point.

It isn’t a wave or an interval: it’s a boundary. It will be essential later on when we study ST elevation and depression.

8. The ST segment: a quiet line in an active heart

The ST segment starts at the J point and ends where the T wave begins.

For much of that time, most of the ventricular myocardium stays depolarized fairly evenly. Since there’s little net electrical difference, the tracing usually stays close to the isoelectric line.

So an almost flat ST doesn’t mean “the ventricles are resting”. The heart is still in full electrical activity.

9. The T wave: ventricular repolarization

Next comes the T wave, the visible sign of much of ventricular repolarization.

The ventricles are gradually recovering their electrical state so they can take part in the next cycle.

P = atrial depolarization · QRS = ventricular depolarization · T = ventricular repolarization.

10. The QT interval: the big ventricular bracket

The QT interval runs from the start of the QRS to the end of the T wave.

It includes the QRS, the ST segment and the T wave. In other words, it spans from the start of ventricular depolarization to the end of visible ventricular repolarization.

Its duration changes with heart rate. Measuring and correcting the QT is saved for Lesson 7. Here we only need to recognize its boundaries.

11. The U wave: a small wave after the T

On some ECGs a small deflection may appear after the T wave: the U wave. It isn’t always visible, and its exact origin hasn’t been fully settled.

To begin with, what matters is knowing it can be there. If a U wave is visible, we shouldn’t automatically include it as part of the T wave when we measure the QT later on.

12. The ECG records electricity, not movement

  • The P wave isn’t atrial contraction: it’s atrial depolarization.
  • The QRS isn’t ventricular contraction: it’s the depolarization that comes before it.
  • The T wave isn’t ventricular relaxation: it’s repolarization.

Electrical and mechanical events are related, but they aren’t equivalent. An ECG shows electrical activity; on its own it doesn’t confirm that there’s effective contraction or a pulse.

13. Rebuild a beat without labels

Normal 12-lead electrocardiogram at 25 mm/s and 10 mm/mV
Normal 12-lead ECG. Pick a lead with well-defined waves and walk through one cycle from left to right. Tap to enlarge.
  1. Look for the first small wave before the QRS: P.
  2. From the end of P to the start of the QRS: PR segment.
  3. From the start of P to the start of the QRS: PR interval.
  4. Find the large ventricular activation: QRS.
  5. Find where the QRS ends: J point.
  6. From J to the start of T: ST segment.
  7. Then comes the T wave.
  8. From the start of the QRS to the end of T: QT.
  9. If a small wave follows, it could be a U wave.

If you can rebuild that sequence without looking at the labels, you no longer have a collection of names: you have a map of the beat.

14. Practice before the quiz

Scenario 1

A measurement starts at the end of the P wave and ends at the start of the QRS. Is that the PR interval?

Show answer

No. That’s the PR segment. The PR interval starts at the beginning of the P wave.

Scenario 2

The tracing is practically flat during the ST segment. Does that mean the ventricle is electrically inactive?

Show answer

No. For much of the ST segment, most of the ventricular myocardium is depolarized fairly evenly, so the net difference being recorded is small.

Scenario 3

A small wave appears after the T wave. Should it automatically be included when you measure the QT?

Show answer

No. It may be a U wave. The QT ends at the end of the T wave.

15. Check what you’ve learned

1. What is an interval?
2. What does the P wave represent?
3. Where is the PR interval measured from?
4. What does the QRS represent?
5. What is the J point?
6. What does the T wave mainly represent?
7. What does the QT interval contain?
8. What do you do if a small wave appears after the T wave?

16. Lesson summary

  • A wave is a shape; a segment is a stretch between shapes; an interval includes a wave and its associated time.
  • The TP segment is a useful reference for the isoelectric line.
  • P = atrial depolarization.
  • PR segment: end of P → start of QRS.
  • PR interval: start of P → start of QRS.
  • QRS = ventricular depolarization.
  • J point = junction between the QRS and the ST segment.
  • ST = a period of relative electrical uniformity in the ventricles.
  • T = ventricular repolarization.
  • QT = start of QRS → end of T.
  • A U wave can follow the T wave and isn’t automatically part of the QT.

Video for this lesson

Coming soon. The video lesson will be published on YouTube (in Spanish) and embedded here once it’s available.

Sources and criteria for Block 1