Basic ECG Course. Lesson 10. QRS: Duration, Q Waves and Precordial Progression
You don’t interpret the QRS by picking one lead and forgetting the rest. It’s the same ventricular activation seen from different places, which is why it can be mostly negative in V1 and clearly positive in V6 without any contradiction.
Duration first. Then morphology. Then Q waves. And finally, walk through V1 → V6.
In this lesson we complete step 5 of the method. We’re not going to diagnose bundle branch blocks, preexcitation, necrosis or ventricular rhythms yet. We’re going to learn to describe the QRS correctly before explaining why it has that shape.
By the end of this lesson you should be able to
- Classify the QRS by its duration.
- Understand that Q, R and S describe deflections, not anatomical areas.
- Recognize that a Q wave doesn’t automatically mean infarction.
- Walk through V1–V6 as a sequence and not as six different ECGs.
- Describe the usual progression of R and S waves.
- Roughly locate the transition zone.
- Recognize when a single chest lead calls for checking the technique.
- Understand why we assess the QRS before interpreting ST and T.
1. Before looking at the shape, look at the duration
The QRS represents ventricular depolarization. We already learned how to measure it in Lesson 7. Now that measurement becomes part of a complete reading.
- ≤110 ms: usual duration.
- >110 and <120 ms: may be considered mildly prolonged, even though it doesn’t reach 120 ms yet.
- ≥120 ms: we usually call it a wide QRS.
At 25 mm/s, 120 ms equals three small boxes.
A wide QRS is a description, not a diagnosis. It tells us that ventricular activation takes longer than usual or follows a different sequence. The cause comes later.
2. Q, R and S are names for deflections
Not every QRS has to contain a Q, an R and an S. The letters describe the direction of the deflections:
- Q: the first negative deflection before an R wave.
- R: the first positive deflection of the complex.
- S: a negative deflection that comes after an R wave.
That’s why we find qR, rS, QS and other combinations. You don’t need to memorize a catalog of shapes. You need to understand that morphology depends on the direction of activation and on the point each lead views it from.
The same ventricular activation can look very different in V1 and V6. Shape matters, but we interpret it after checking the duration.
3. A Q wave doesn’t automatically mean infarction
One automatic association worth dropping from the start is this:
Q wave ≠ automatic infarction.
Small Q waves can be normal, especially in lateral leads such as I, aVL, V5 and V6. Small q waves can also show up in some inferior leads without meaning disease on their own.
When we find a Q wave, we’ll describe:
- its width;
- its depth;
- which leads it appears in;
- whether it’s present in contiguous leads;
- what’s happening with the rest of the QRS and the whole ECG.
The criteria for pathological Q waves and their link to necrosis or infarction come in the ischemia block. Here the goal is to keep a single letter from turning into a diagnosis too soon.
4. The chest leads form a sequence
V1, V2, V3, V4, V5 and V6 view ventricular activation from successive positions across the chest. So we shouldn’t read them as six separate snapshots.
Always walk through V1 → V2 → V3 → V4 → V5 → V6.
In a usual pattern:
- in V1 there’s usually a small R wave and a deeper S wave;
- moving to the left, the R wave usually grows;
- at the same time, the S wave usually gets shallower;
- by V5–V6, a positive deflection usually dominates.
It doesn’t have to be a perfect staircase. There can be small variations between neighboring leads. What matters is an overall logic from right to left.

5. The transition zone
At some point along the way, the R wave stops being smaller than the S wave and starts to dominate. The lead where R and S have similar amplitude roughly marks the transition zone.
It often appears around V3–V4, but it can come earlier or later. Don’t turn V3 into a rigid border.
The useful questions are:
- is the R wave getting taller?
- is the S wave getting smaller?
- is there a recognizable transition?
- is the change reasonably gradual?
6. When one chest lead breaks the sequence
Picture a consistent progression in V1, V2, V3, V4 and V6, but V5 looks like it belongs to another tracing. Before looking for a complex explanation, go back to technique.
- Is the electrode placed correctly?
- Could a chest lead wire have been swapped?
- Did the patient’s anatomy or position make placement difficult?
- Is there a previous ECG to compare with?
Poor placement can produce an odd progression. And poor R-wave progression is a nonspecific finding: it can have different causes or be a normal variant. First we describe it, then we check the technique, and finally we fit it together with the rest of the ECG.
7. Don’t measure the QRS in whichever lead is easiest
All 12 leads are recorded at the same time, but the start or end of the QRS may be easier to see in some leads than others. If in doubt, look at several.
It isn’t right to pick the lead where the QRS looks narrowest simply because its boundaries are less clear there. Look for where you can best identify:
- the real start of the first ventricular deflection;
- the end of the last deflection before the J point.
We’re not chasing an impossible one-millisecond precision. We want to avoid a poor visual choice turning a wide QRS into a narrow one, or the other way around.
And use complexes that represent the underlying rhythm. If a premature complex appears with clearly different morphology, analyze it separately and don’t use it as if it described the whole tracing.
8. The QRS shapes how we’ll read ST and T
The order of the method has a reason. When ventricular activation is abnormal, repolarization can change secondarily too.
QRS and chest leads first. ST and T afterward.
We don’t need to study all the secondary patterns yet. Just hold on to the idea: an ST segment or a T wave shouldn’t be interpreted while forgetting what the QRS before it looked like.
9. Carry out step 5 in full
When you get to the QRS on a real ECG, follow this sequence:
- Duration: does it reach 120 ms?
- Morphology: are the complexes of the underlying rhythm consistent?
- Q waves: does any stand out because of size or distribution?
- Chest leads: walk through V1 → V6.
- Progression: does R grow and S shrink overall?
- Transition: where do R and S roughly balance out?
- Technique: if something abruptly breaks the sequence, could placement explain it?
A basic report might read like this:
Narrow QRS, no notable Q waves, preserved precordial progression.
10. Practice
A QRS measures 140 ms. What can you say right away?
Show solution
That it’s wide. The measurement doesn’t identify the cause on its own.
You find a small q wave in V6. Do you diagnose an infarction?
Show solution
No. A small lateral q wave can be normal. You need to assess size, distribution and context.
S dominates in V1; R grows progressively and R and S are similar in V3–V4. What does that describe?
Show solution
A precordial progression and transition consistent with a usual pattern.
Only V5 abruptly breaks an otherwise consistent sequence. What do you check before building a theory?
Show solution
The technique and electrode placement, and compare with a previous ECG if there is one.
11. Check what you’ve learned
The usual working threshold is ≥120 ms.
An isolated Q wave has no automatic diagnostic value.
We look for an overall trend, not a perfect staircase.
It’s often around V3–V4, with normal variation.
A discordant chest lead means checking the recording first.
How the ventricles depolarize shapes how we interpret the repolarization that follows.
12. Summary
- First classify the QRS by duration.
- ≤110 ms: usual duration; >110 and <120 ms: mildly prolonged; ≥120 ms: wide QRS.
- Q, R and S are names for deflections.
- A Q wave doesn’t automatically mean infarction.
- The chest leads are read as a sequence, V1 → V6.
- R usually grows and S shrinks from right to left.
- The transition is usually around V3–V4, with some variation.
- A single odd chest lead calls for checking the technique.
- The QRS is analyzed before ST and T because it shapes how repolarization is interpreted.
Video for this lesson
Coming soon. The video lesson will be published on YouTube (in Spanish) and embedded here.
Course navigation
← Lesson 9. Electrical axis with I and aVF · Back to the course · Lesson 11. ST segment and T wave →
