Español

Basic ECG Course. Lesson 2. What P, QRS and T Mean

The first time we look at an electrocardiogram, it’s easy to see nothing but a string of spikes and lines. Then we learn a few letters (P, QRS, T) and a second risk appears: memorizing that each letter “means something” without understanding what is actually happening in the heart.

In this lesson we’ll do the opposite. We’ll follow a normal heartbeat from the moment the impulse is born until the ventricles get back to their starting electrical state. By the end, P, QRS and T should stop being isolated drawings and become moments in a single electrical sequence.

By the end of this lesson you should be able to

  • Explain what depolarization and repolarization mean without memorizing advanced cell physiology.
  • Follow the impulse from the sinus node to the ventricles.
  • Link the P wave to atrial depolarization.
  • Link the QRS complex to ventricular depolarization.
  • Link the T wave to ventricular repolarization.
  • Tell electrical activity apart from mechanical contraction.
  • Read a normal cycle as a sequence: P → PR → QRS → ST → T.

1. The minimal heart map we need

We don’t need to review all of cardiac anatomy to understand an ECG. For this lesson a simple functional map is enough: two atria, two ventricles, a muscle that can be activated electrically and a network that organizes the impulse’s path.

The atria receive blood and finish filling the ventricles. The ventricles are the chambers that do most of the pumping. The left ventricle has more muscle mass because it pushes blood into the whole systemic circulation; that extra mass is also part of why the ventricular signal dominates much of the normal ECG.

The valves are essential for directing flow, but it’s worth separating two worlds right now: the ECG doesn’t record valves opening or closing. It records the electrical activity of the myocardium.

Simplified frontal section of the heart showing atria, ventricles, valves and the thicker left ventricular wall.
The ECG doesn’t need the heart’s full anatomy, but it does need a minimal functional map: atria, ventricles, septa and myocardium. Tap to enlarge.

2. Depolarization and repolarization, no more complicated than necessary

A resting heart cell keeps an electrical difference between the inside and the outside of its membrane. We can think of it as a cell that is ready to fire.

When it receives the right stimulus, that distribution of charges changes quickly. We call that change depolarization. Afterwards the cell has to get back to its resting electrical state so it can take part in the next beat. That recovery process is repolarization.

To read a basic ECG we don’t need to memorize the phases of the action potential or every ion channel here. We do need to hold on to one idea:

Depolarizing means activating electrically. Repolarizing means recovering the electrical state needed for the next cycle.

3. One cell doesn’t make an ECG

A single cell’s action potential is microscopic. An electrocardiograph on the skin doesn’t draw one of those action potentials blown up.

The ECG appears because millions of cells activate in a coordinated way. While one area is already depolarized and another isn’t yet, there’s an electrical difference between them. That difference creates a force with a direction. The forces from many areas add up, and the machine records the part of that sum that projects onto each lead.

That’s why the same activation can produce a positive wave in one lead and a negative one in another. The heart hasn’t changed: the point from which we’re looking at it has.

Key idea: the ECG doesn’t record the electricity of a single cell. It records the changing sum of the electrical forces that project onto each lead.

4. The normal path of the impulse

Normally the impulse starts in the sinus node, in the right atrium. Its cells have automaticity: they can generate, on their own, the impulse that starts each beat.

From there, activation spreads through both atria. It then reaches the atrioventricular (AV) node, where conduction slows down. That delay isn’t a fault: it lets atrial activation come before ventricular activation.

Next the impulse travels down the bundle of His, the right and left bundle branches and the Purkinje network. This network distributes the signal very quickly through a huge ventricular mass, so both ventricles are activated in a very short time.

Diagram of the cardiac conduction system: sinus node, atria, AV node, bundle of His, bundle branches and Purkinje network.
The impulse follows an orderly route: sinus node, atria, AV node, His bundle, bundle branches and Purkinje fibers. Tap to enlarge.

This path explains a huge part of the ECG. If the impulse follows the usual route, ventricular activation is fast and the QRS is usually narrow. If a bundle branch fails or the impulse starts inside the ventricle, activation has to spread through slower pathways and the QRS can widen. We’ll study that later, in the conduction block.

5. The P wave: the first visible sign of the beat

The sinus node starts the beat, but its mass is too small to produce a visible wave on the surface ECG. So the real electrical start of the beat happens before the first wave we see.

The first visible signal usually appears when the impulse spreads through the atrial myocardium. That combined depolarization of both atria produces the P wave.

P wave = atrial depolarization.

The P wave doesn’t directly represent the sinus node. The node starts the process; what we see is the electrical response of a much larger mass: the atria.

Nor should we say the P wave “is atrial contraction”. Electrical activation comes first and then triggers the mechanical response. They’re related, but they aren’t the same thing.

6. Between P and QRS: the electricity keeps moving even when the line looks quiet

After depolarizing the atria, the impulse crosses the AV node and the proximal parts of the His-Purkinje system. For much of this journey there’s no large wave on the surface.

That doesn’t mean the heart is “doing nothing”. It means that at that moment the sum of forces visible from the surface is small.

That time is included in the PR interval, which we’ll learn to measure later. For now, one idea is enough: between P and QRS the impulse hasn’t stopped; it’s on its way to the ventricles.

7. The QRS complex: the ventricles depolarize

When the impulse reaches the His-Purkinje network, it spreads quickly through both ventricles. Depolarization of that large muscle mass produces the QRS complex.

QRS complex = ventricular depolarization.

The QRS usually has much more amplitude than the P wave because a far larger muscle mass is involved. But electrical amplitude doesn’t mean contractile force: a tall QRS doesn’t prove the ventricle is pumping harder.

Why do we talk about Q, R and S?

The QRS isn’t a single wave because the dominant direction of the forces changes as different areas of the ventricles activate. To describe those deflections we use simple naming:

  • Q: the first negative deflection before an R wave.
  • R: the first positive deflection of the complex.
  • S: a negative deflection that comes after an R wave.

Not every QRS has all three letters. A complex may be entirely positive, mostly negative or some other combination depending on the lead. The letters describe shape, not three specific anatomical areas.

8. Where is atrial repolarization?

The atria have to repolarize too. Yet we normally don’t see a clearly separate atrial repolarization wave.

The practical reason is simple: it happens at about the same time ventricular depolarization begins, and its signal is much smaller than the QRS. Ventricular activity hides it on the surface ECG.

So the usual visible cycle isn’t P, then “atrial repolarization”, then QRS. Atrial repolarization exists, but it’s usually hidden inside the big ventricular signal.

9. The ST segment: the ventricles are still active even though the line returns toward baseline

After the QRS, much of the ventricular myocardium is depolarized fairly evenly. Because there are few net electrical differences between regions, the tracing usually comes close to the baseline.

That stretch is the ST segment. We’ll study it in detail later. Here we only need to understand one important thing:

An almost flat line doesn’t mean the heart is inactive.

The ventricles are still electrically activated and mechanically working. What’s missing is a large net difference that the lead can draw.

10. The T wave: the ventricles repolarize

After activating, the ventricular cells have to recover their electrical state so they’re ready for the next beat. The main visible sign of that recovery is the T wave.

T wave = ventricular repolarization.

The T wave doesn’t directly represent mechanical relaxation either. Repolarization and relaxation are related in time, but the ECG is still recording electricity.

Why is the T wave usually positive where the QRS is positive?

At first glance it might seem logical that repolarization, being the opposite electrical process to depolarization, would always produce a wave in the opposite direction. However, ventricular repolarization doesn’t travel through the myocardium in exactly the same order as depolarization.

In many regions the outer layers of the ventricle recover their electrical state before the inner layers. Because both the electrical process and the direction of spread are reversed, the T wave ends up positive in many leads where the QRS is also positive.

You don’t need to memorize more detail for now. The useful idea is that the QRS and T wave don’t have to point in opposite directions.

11. A complete beat, read from left to right

Now we can put everything together in a single sequence:

Parts of an ECG cycle in lead II: P wave, PR interval, QRS complex, J point, ST segment, T wave, QT interval and U wave
A complete electrical cycle in lead II. In this lesson we mainly want to recognize the P–QRS–T sequence. Figure from El idioma del ECG; labels in Spanish. Tap to enlarge.
  1. The sinus node starts the impulse. Its activity isn’t seen directly.
  2. The atria depolarize. The P wave appears.
  3. The impulse crosses the AV junction. Part of that journey falls within the PR interval.
  4. The ventricles depolarize quickly. The QRS complex appears.
  5. For a while the ventricular myocardium is electrically fairly uniform. The tracing comes close to baseline during the ST segment.
  6. The ventricles repolarize. The T wave appears.
  7. The cells are ready for the next cycle.

This sequence matters more than memorizing separate definitions. Every time you look at an ECG, try to read it as a story that moves from left to right.

12. Electricity and contraction: related, but not the same

Electrical activation sets off cellular processes that end in contraction. In simplified form:

Electrical activation → calcium movement → contraction.

The ECG records the first part of that chain. It doesn’t directly measure how strong the beat is.

  • The P wave isn’t atrial contraction.
  • The QRS isn’t ventricular contraction.
  • The T wave isn’t ventricular relaxation.

This has an essential clinical consequence: there can be organized electrical activity without a contraction strong enough to produce a pulse. That’s why a monitor never replaces assessing the patient.

13. The table to remember

ElementWhat it representsWhat it doesn’t directly represent
P waveAtrial depolarizationAtrial contraction
PR intervalThe path from the start of atrial activation to the start of ventricular activationOnly the time spent in the AV node
QRS complexVentricular depolarizationStrength of ventricular contraction
ST segmentA period when the ventricular myocardium is electrically fairly uniformAbsence of cardiac activity
T waveVentricular repolarizationVentricular relaxation

14. Practice before the quiz

Scenario A

You see a P wave followed by a QRS. Does the P wave mean the atria have already contracted?

Check your reasoning

No. The P wave represents atrial depolarization. The mechanical response comes after the electrical activation.

Scenario B

Between the P wave and the QRS the line looks almost flat. Has the impulse stopped?

Check your reasoning

No. The impulse keeps going through the AV junction and the proximal conduction system. A tracing that sits near the baseline doesn’t mean there’s no electrical activity.

Scenario C

A monitor shows regular QRS complexes, but the patient has no pulse. Does that contradict what you’ve learned?

Check your reasoning

No. The QRS shows ventricular depolarization, not effective contraction. Electrical activity and mechanical function are related, but they aren’t equivalent.

15. Check what you’ve learned

Choose one option for each question and click Show answers. Along with your score, you’ll see a short explanation for each answer.

1. What does the P wave represent?
2. What does the QRS complex represent?
3. What does the T wave mainly represent?
4. What happens between the P wave and the QRS?
5. Why isn’t atrial repolarization usually seen as a separate wave?
6. A patient has regular QRS complexes on the monitor but no pulse. Which conclusion is correct?

16. Lesson summary

  • Depolarization means electrical activation; repolarization means electrical recovery.
  • The sinus node starts the impulse, but its activity isn’t seen directly.
  • The P wave represents atrial depolarization.
  • The impulse keeps traveling toward the ventricles during the PR interval, even if the tracing looks almost flat.
  • The QRS represents ventricular depolarization.
  • Atrial repolarization is usually hidden by the QRS.
  • The ST segment can be nearly isoelectric even though the myocardium is still active.
  • The T wave represents ventricular repolarization.
  • The ECG records electricity, not the strength of contraction.
  • A normal cycle can be followed as P → PR → QRS → ST → T.

Video for this lesson

Coming soon. This lesson will also be covered on the Cardiología sin Miedo YouTube channel (in Spanish). Once the video is published, it will be embedded here at the end as a companion to the written version.

Go to the YouTube channel →

Sources and criteria for Block 1