Español

Basic ECG Course. Lesson 19. Right Bundle Branch Block

Block 2 · Cardiac conduction · 14 min of reading and practice

Every P wave can conduct and the QRS can still be wide. The impulse reaches the ventricles. The question now is how it spreads, and which ventricle ends up being activated late.

Measure the QRS and look at its final part in V1, I and V6.

By the end of this lesson you should be able to

  • Explain why right bundle branch block widens ventricular activation.
  • Recognize the complete RBBB pattern in V1–V2 and in the lateral leads.
  • Tell the complete pattern apart from an isolated rSr′ in V1.
  • Interpret the axis and ST–T together with the shape of the QRS.

1. Where the delay shows up

With the left-sided system intact, the impulse activates much of the left ventricle early. The right ventricle finishes activating later. On the ECG, that late part mainly changes the end of the complex.

In V1, terminal activation toward the right side usually produces a positive deflection, the R′ of the typical pattern. A lateral lead such as I or V6 looks from the opposite direction. There, the terminal component usually shows up as a broad S wave.

2. Three checks for the complete pattern

1. Duration. In adults, a QRS of 120 ms or more lets you consider complete bundle branch block. At 25 mm/s, 120 ms is three small boxes.

2. Right precordial leads. In V1 or V2, look for a terminal positive deflection, with an rsR′, rSR′ or similar morphology. The naming depends on the size of each deflection, and the pattern may be clearer in one of the two leads.

3. Lateral leads. In I and V6, look for a widened terminal S wave. In the classic criterion, it lasts more than 40 ms or longer than the R wave in that lead. Compare both sides of the chest to support the classification.

3. When V1 has two peaks

An isolated rSr′ can appear with a normal QRS duration, in variants of right-sided activation, or when V1–V2 are placed too high. With an unexpected strip, check electrode position and look for the final component in the lateral leads.

Some references classify the RBBB morphology with a QRS of 110–119 ms in adults as incomplete RBBB. Use the duration and the overall morphology. If quality or the onset of the QRS makes the measurement doubtful, report what you can recognize and measure on a suitable recording.

4. What else to read after the QRS

The frontal axis can be normal in RBBB. If lead I is positive and the QRS is mostly negative in II and aVF, examine the limb leads for an associated left anterior fascicular block. That reasoning is developed in Lesson 21.

Abnormal activation can come with secondary ST–T changes, especially in the right precordial leads. If the tracing is new or there are symptoms, compare with a previous ECG and assess the context. The RBBB morphology doesn’t explain every repolarization change on its own.

5. Practice

Look at the ECG before opening the solution. You can zoom in on the tracing to count boxes.

Synthetic ECG for comparing QRS duration and its terminal part in the right precordial and lateral leads.
Practice ECG with an adapted synthetic morphology. Compare the end of the QRS in V1, I and V6. Open the ECG at full size
  1. What’s happening with the PR and the P–QRS relationship?
  2. Measure the QRS in V1 or V6. Compare its final part in V1, I and V6.
  3. Check the axis in I and aVF. Which findings will you bring together?
See the worked solution

There’s sinus rhythm at about 70 bpm, with 1:1 conduction and a PR close to 160 ms. In V1/V2 the QRS spans about three and a half small boxes, roughly 140 ms, and ends in an R′. In I and V6, the terminal component is a broad S wave. I and aVF are mostly positive, pointing to a normal axis.

Integration. Sinus rhythm with a complete right bundle branch block pattern.

6. Check what you’ve learned

1. Which combination supports complete RBBB in an adult?
2. You see rSr′ in V1 with a QRS of 96 ms. What do you do before calling it a block?
3. In step 4 you see 1:1 conduction with a PR of 160 ms. What if there’s also RBBB?
4. What should you check if RBBB appears with marked left axis deviation?

7. Summary

  • Combine QRS duration, the terminal deflection in V1–V2 and the lateral S wave.
  • Check electrode placement if the pattern depends on a single lead.
  • Describe the axis and repolarization in their own steps.

We’ll use the same leads in the next lesson. The end of the QRS will change, because the late activation belongs to the left ventricle.


Video for this lesson

Coming soon. The video lesson will be published on YouTube (in Spanish) and embedded here.