Basic ECG Course. Lesson 13. Sinus Bradycardia
Block 2 · Cardiac conduction · 12 min of reading and practice
The monitor reads 48. Before you call it sinus bradycardia, look at the strip. Are the atria slow too? Or are they firing at a normal rate while only some of their impulses reach the ventricles?
Until now we measured heart rate to describe the rhythm. In this block we’ll measure it to find out where the problem starts.
Count the P waves and the QRS complexes separately. Then check whether they match up.
By the end of this lesson you should be able to
- Calculate the atrial and ventricular rates on a regular strip.
- Recognize P waves of sinus origin and confirm 1:1 conduction.
- Tell a low heart rate apart from sinus node dysfunction.
- Describe a bradycardia in one sentence that explains what you see.
1. Go back to the P wave
Start by checking the technique. Filtering, movement or an unhelpful lead can hide a small P wave. Then look for the P wave in II and compare its shape in other leads, especially aVR. A P wave that is usually positive in II and negative in aVR, with stable morphology, supports a sinus origin.
Follow several P waves with the edge of a sheet of paper or with ECG calipers. If they come slowly and each one is followed by a QRS with a stable PR, the atria and ventricles share the slow pace. That’s the basic pattern of sinus bradycardia with 1:1 AV conduction.
2. Measure both rates
On a regular strip at 25 mm/s, divide 60 by the interval in seconds. Use PP for the atrial rate and RR for the ventricular rate. If both measure 1.25 s, both rates are around 48 bpm. You can also use the small-box rule you learned in Fundamentals.
When describing the ECG of an adult at rest, under 60 bpm is the usual description of sinus bradycardia. Some guidelines, such as the 2018 ACC/AHA/HRS bradycardia guideline, use under 50 bpm when assessing sinus node dysfunction. On a teaching strip, 58 bpm describes a rate. In a real person, the number is interpreted together with the context and the symptoms.
If the PP interval varies gradually, describe the regularity and take a representative stretch. A single pair of widely spaced waves can exaggerate how much the rhythm has slowed.
3. Two theoretical examples with the same ventricular rate
Example A. P waves and QRS complexes at 45 bpm, with a stable PR. Atrial activation is already slow and every P wave conducts.
Example B. P waves at 90 bpm and QRS complexes at 45 bpm. One P wave conducts and the next one has no QRS, alternately. The low rate is ventricular, and the problem lies in how impulses pass from the atrium to the ventricle.
If you stop at the number on the monitor, both examples give the same ventricular rate. The first clue that separates them shows up in step 2. The P–QRS relationship confirms it in step 4.
4. What you can conclude
Sleep, athletic training, vagal tone and certain medications can explain a low sinus rate. To assess possible sinus node dysfunction, what matters is when it happens, whether it matches the symptoms and how the rate behaves at other times. A snippet of ECG describes the rhythm during the recording.
In a basic conclusion, write the origin, the rate and how the P waves conduct. Add a QRS finding if it’s relevant. In someone with presyncope, syncope or signs of hypoperfusion at that moment, clinical assessment takes priority over naming the pattern.
5. Practice
Look at the ECG before opening the solution. You can zoom in on the tracing to count boxes.

- Take two PP intervals and two RR intervals. What rates do you get?
- Check in II and aVR where the P waves seem to come from. How many P waves do you see for each QRS in the complete cycles?
- Measure a PR in a well-defined cycle. Write the conclusion in one sentence.
See the worked solution
The PP and RR intervals are about 1.25 s, close to 48 bpm in both the atria and the ventricles. The P waves are consistent with a sinus origin and each P wave is followed by a QRS. The PR stays stable. On the long lead II strip, measure from the start of the P wave to the start of the QRS: about four small boxes (roughly 160 ms). The QRS is narrow.
Integration. Sinus bradycardia at about 48 bpm, with 1:1 AV conduction and a narrow QRS. How much that rate matters will depend on the context.
6. Check what you’ve learned
The PP interval measures the time between successive atrial activations.
The atrial rate is already slow and every P wave is conducted.
The atrium is activated at 90 bpm. Only half of the atrial impulses reach the ventricles.
The tracing describes the rate and the activation sequence. Its clinical relevance requires knowing the context.
7. Summary
- PP and RR answer different questions. If they’re equal, confirm that each P wave is paired with its QRS.
- A sinus origin, a low rate and 1:1 conduction make up the typical pattern.
- A single number describes what happened during that recording. Linking it to symptoms takes context.
In the next lesson we’ll follow the PP interval when a P wave fails to appear when expected.
Video for this lesson
Coming soon. The video lesson will be published on YouTube (in Spanish) and embedded here.
